Wash your face with soap and cold water. Next, apply a generous amount of the Aqualis Activator serum to the areas you want to treat. Ensure there is a thick, even layer of serum to ensure safety and maximum efficiency.

The Aqualis Activator is specially formulated to be highly thermally conductive, helping to effectively deliver fractional RF energy to the dermis layer. It also provides a cooling sensation and additional skin benefits.

Turn on the VEAUTY Dot and make sure the indicator light is green. Select one of the three energy levels: Low, Medium, or High.

Always begin with the Low setting to test your skin's tolerance and allow it to gradually adjust. Starting on a higher setting too soon may cause heat rash, irritation, or minor burns.

Firmly press the head of the device against the treatment area, making sure all electrodes are in full contact with your skin. Hold it in place until you feel the heat build to a comfortable level, typically 2–5 seconds for beginners, longer for experienced users.

The device vibrates every 2 seconds to indicate it is delivering RF energy correctly. Use these vibrations to time your holds.

Always lift the device if the heat becomes too intense. Do not force yourself to hold it longer than is comfortable, as this can cause heat rash or skin irritation.

Once you've built up heat in one area, lift and move to the next. You can go over each area up to three times per session. For sensitive areas or higher settings, stick to 1–2 passes.

While the stamp-and-hold method is recommended for best results, the glide technique, where you continuously move the device over the skin, can also be used. This is more comfortable for heat-sensitive skin and useful for treating larger areas quickly.

For optimal effectiveness, holding the device in place allows more heat to penetrate the skin, delivering superior results.